TMPro

Subaru

Software module 190

Subaru 2013 BCM Mitsubishi.
Memory device is serial eeprom 24c02 SMD8 package.
Expected file size is 256 bytes.
Use original Subaru key or Texas Crypto 40/80 bit transponder, for example Ford 80-bit .
Written transponder is ready programmed to start vehicle.

Vehicles equipped with this unit:
Subaru: Forester, XV, Legacy, Impreza, Outback, WRX
Software module 188

Toyota, Lexus, Subaru SMART key unit Denso.
Memory device is serial eeprom 93c66 or 93c86 SMD8 package.
Exected file size for 93c66 is 512 bytes, for 93c86 is 2048 bytes.
Use ONLY ORIGINAL Toyota, Lexus and Subaru keys – DST 40, DST 80 (G-keys) or DST 128 (H-keys).
Programmed key will start vehicle when you put it near START button.
HandsFree function WILL NOT WORK.
To activate it, you must program ANOTHER NEW key by OBD2.
You CANNOT reprogram SAME KEY, that you added to file.

Vehicles equipped with this unit:
Toyota: Land Cruiser 200, Land Cruiser Prado, RAV4, Venza, Corolla, Spade, Porte, Vios, Yaris Lexus: LX 570, GX 460, RX, LS 460, GS, IS Subaru: Outback, Legacy, Forester, XV Crosstrek
Software module 157

Texas Crypto 4D-63, 4D-64, 6D-72 new chip 
This software can prepare JMA TPX2 or CN2/CN5 or K-JMD transponder to 4 types:
– Texas Crypto 4D-63 Ford/ Mazda/ Lincoln
– Texas Crypto 4D-64 Chrysler/ Subaru/ Jeep/ Renault/ Isuzu
– Texas Crypto for Triumph Tiger Explorer motorbikes
– Texas Crypto 6D-72 Toyota G with password 36, 56, 96, 37, 57 and 97. For Toyota G preparation only CN2/CN5 or K-JMD is possible to be used.
Prepared transponder you can program to car using diagnostic OBD2 device.

Vehicles equipped with this unit:
Software module 143

Mitsubishi, Subaru immobox Mitsubishi ID4D
Memory device is Motorola MCU MC68HC805P18 QFP44 package.
For reading of MCU you can use MC68HC805P18 adapter . Expected file size is 128 bytes. Use JMA TPX2 – Errebi TX2 or CN2/CN5 or K-JMD or YS-01 transponder. Written transponder is ready programmed to start the vehicle.

Vehicles equipped with this unit:
Mitsubishi: Eclipse, Galant, Lancer, Pajero, Montero, Shogun Subaru: Tribeca, Forester, Impreza, Legacy
Software module 135

Subaru immobox Mitsubishi Memory device is serial eeprom 24c01 SMD8 package. Expected file size is 128 bytes.Use JMA TPX2 – Errebi TX2 or CN2/CN5 or K-JMD or YS-01 transponder. Written transponder is ready programmed to start car.

Vehicles equipped with this unit:
Subaru: Tribeca(2005-), Forester(2005-), Outback(2005-), Legacy(2005-),Impreza(2005-)
Software module 43

Nissan, Subaru immobox Siemens Memory device is Motorola MCU MC68HC05B6 PLCC52 package. Expected file size is 256 bytes. Use T5 transponder. Written transponder is ready programmed to start the vehicle.

Vehicles equipped with this unit:
Nissan: Almera(-1998),Primera(-1998), Pulsar(-1998), Serena(-1998), Sunny, Terrano 2(-1998), Vannete(-1998) Subaru: Impreza(-2000), Legacy(-1998), Outback(-1998)