TMPro

Iveco

Software module 175

Fiat Grand Siena, Palio BSI Marelli type 5 with ID46. Memory device is serial eeprom 95c160 or 95c640 SSOP8 package.
Expected file size is 2048 or 8192 bytes. Use PCF7936 or Silca T14 – JMA TP12 or CN3 transponder or remote key with PCF7946.
IMPORTANT when you want to program remote key :open key and look on PCB.
You will find 2 SMD chips – PCF7946 (SMD 14 pins) and smaller SMD chip, which can be with 8, 10, or 16 pins.
If smaller SMD chip is with 10 or 16 pins, PROGRAM KEY AS TYPE 1.
If smaller SMD chip is with 8 pins, PROGRAM KEY AS TYPE 2.
IMPORTANT:if buttons of remote operate, but not work properly, for ex. button for locking opens trunk, this is NOT A TMPro SOFTWARE PROBLEM. Use other type remote.
Software shows 5-digit PIN code.
Written transponder is ready programmed to start the vehicle.

Vehicles equipped with this unit:
Fiat:Grand Siena (2011-), Palio (2011-), Ducato(2011-), 500L(2011-) Alfa Romeo:Giulietta(2011-) Iveco:Daily(2011-)
Software module 45

Fiat, Lancia, Citroen, Peugeot vans, Iveco vans/trucks CODE2 with BSI Marelli type 2 Memory device is serial eeprom 95c160 or 95c320, both SSOP8 package. For 95c160 expected file size is 2048 bytes, for 95c320 is 4096 bytes. Software shows 5-digit PIN code.

Use Megamos Crypto or Silca T6 – JMA TP08 or TS48 or CN6 or KD48 transponder. Written transponder is ready programmed to start the vehicle.

Vehicles equipped with this unit:
Fiat: Bravo(2007-), Ducato(2006-), Stilo(2007-), Punto(2007-) Citroen: Jumper(2006-), Relay(2006-) Peugeot: Boxer(2006-) Lancia: Ypsilon(2007-) Iveco: Daily(2007-), Eurocargo(2007-)
Software module 36

Iveco Daily/Iveco Truck immobox Bosch

This module can be used in 2 ways:

1.If you don`t know 5-digit PIN code:Memory device is serial eeprom 93c56 SMD8 package.
Expected file size is 256 bytes.Module shows PIN code.
Use PCF7936 or Silca T14 – JMA TP12 transponder.
If you use PCF7936 written transponder have to be matched with car using diagnostic device,if you use CN3 – no  need.
2.If you know 5-digit PIN code:Start software and select manually module.
Insert PCF7936 or Silca T14 – JMA TP12 transponder.
Press PROG button. Software prepares transponder. Match prepared transponder with car using diagnostic device and PIN code.

Vehicles equipped with this unit:
Iveco: Daily(2001-2007) Iveco trucks: Eurocargo(2001-2007), Stralis(2001-2007)
Software module 4

Alfa Romeo, Iveco CODE1 immobox Bosch Memory device is serial eeprom 93c46, which can be either DIL8 or SMD8 package. Expected file size is 128 bytes. Use T5 transponder. Written transponder is ready programmed to start the vehicle.

Vehicles equipped with this unit:
Fiat: Coupe, Croma Alfa Romeo: 145, 146, 155, 164, GTV, Spider Iveco: Daily(-2001) Lancia: K, K coupe