TMPro

Citroen

Software module 194

Fiat South America immobox Marelli IMM009.10
Memory device is Motorola 9S08DZ32 32-pin SMD package.
You can read Motorola with TMPro, download connection diagram. Software shows 5-digit PIN code.
Use Megamos Crypto or Silca T6 – JMA TP08 or TS48 or CN6 or KD48 transponder.
Written transponder is ready programmed to start car.

You can watch video HERE and HERE.

Vehicles equipped with this unit:
Fiat: Fiorino Furgao, Palio 2012->, Siena 2012->, Ducato 2012-> Peugeot: Boxer 2012-> Citroen: Jumper 2012->
Software module 153

Toyota,Lexus,Peugeot,Citroen immobox with ID 4D-67,4D-68 and 4D-70 Memory device is serial eeprom 93c56/93c66/24c04 8 pin SMD package. Expected file size is 256/512 bytes. Use JMA TPX2 – Errebi TX2 or CN2/CN5 or K-JMD or YS-01 transponder. Written transponder is ready programmed to start car.

Vehicles equipped with this unit:
Toyota:4Runner,Alphard,Auris,Avalon,Avensis,AvensisVerso,Avanza,Aygo,Camry,Corolla,Corolla Verso,Fortuner,Hiace,Highlander, Landcruiser,Prius,Premio,RAV4,Sequoia,Takoma,Tundra,Yaris Lexus:ES330,ES350,GS300,GS350,GS430,GS450,GS460,GX470,IS220,IS250,IS300, IS350,LS430,LX470,RX300,RX330,RX350,SC430 Citroen:C1 Peugeot:107
Software module 133

Citroen Xantia CPH Texton ID48 Memory device is serial eeprom 93c66 SMD8 package. Expected file size is 512 bytes. Use Megamos Crypto or Silca T6 – JMA TP08 or TS48 or CN6 or KD48 transponder. Written transponder is ready programmed to start car.

Vehicles equipped with this unit:
Citroen: Xantia (1998-)
Software module 112

Fiat, Lancia, PSA BSI Marelli type 3.
Memory device is serial eeprom 95c160 SSOP8 package.
Expected file size is 2048 bytes.
Use PCF7936 or Silca T14 – JMA TP12 or CN3 transponder or remote key.
IMPORTANT when you want to program remote key :open key and look on PCB.
You will find 2 SMD chips – PCF7946 (SMD 14 pins) and smaller SMD chip, which can be with 8, 10, or 16 pins.
If smaller SMD chip is with 10 or 16 pins, PROGRAM KEY AS TYPE 1.
If smaller SMD chip is with 8 pins, PROGRAM KEY AS TYPE 2.
IMPORTANT: if buttons of remote operate, but not work properly, for ex. button for locking opens trunk, this is NOT A TMPro SOFTWARE PROBLEM. Use other type remote.
Software shows 5-digit PIN code.
Written transponder is ready programmed to start the vehicle.

Vehicles equipped with this unit:
Fiat: Bravo(2007-), Ducato(2006-), Stilo(2007-), Punto(2007-), Idea(2008-) Citroen: Jumper(2006-), Relay(2006-) Peugeot: Boxer(2006-) Lancia: Ypsilon(2007-), Musa(2007-)
Software module 59

Fiat Grande Punto BSI Delphi. Memory device is serial eeprom 93c86 SMD8 package or NEC MCU. For serial eeprom 93c86 expected file size is 2048 bytes. You can read Fiat BSI by OBD2 using Immo tool with Fiat software activation. For files read by OBD2 expected size is 21 or 32768 or 65536 bytes. Use PCF7936 or Silca T14 – JMA TP12 or CN3 transponder or remote key with PCF7946. Software shows 5-digit PIN code. Written transponder is ready programmed to start the vehicle.

Note: for files read by OBD2 from NEC MCU software shows PIN code and prepares keys but does not create new file. You must program prepared keys by OBD2 and PIN code.
IMPORTANT when you want to program remote key :open key and look on PCB.
You will find 2 SMD chips – PCF7946 (SMD 14 pins) and smaller SMD chip, which can be with 8, 10, or 16 pins.
If smaller SMD chip is with 10 or 16 pins, PROGRAM KEY AS TYPE 1.
If smaller SMD chip is with 8 pins, PROGRAM KEY AS TYPE 2.
IMPORTANT: if buttons of remote operate, but not work properly, for ex. button for locking opens trunk, this is NOT A TMPro SOFTWARE PROBLEM. Use other type remote.

Vehicles equipped with this unit:
Fiat: Grande Punto, New 500, Fiorino Alfa Romeo: Mito Ford: KA Citroen: Nemo Peugeot: Bipper Opel: Combo D
Software module 45

Fiat, Lancia, Citroen, Peugeot vans, Iveco vans/trucks CODE2 with BSI Marelli type 2 Memory device is serial eeprom 95c160 or 95c320, both SSOP8 package. For 95c160 expected file size is 2048 bytes, for 95c320 is 4096 bytes. Software shows 5-digit PIN code.

Use Megamos Crypto or Silca T6 – JMA TP08 or TS48 or CN6 or KD48 transponder. Written transponder is ready programmed to start the vehicle.

Vehicles equipped with this unit:
Fiat: Bravo(2007-), Ducato(2006-), Stilo(2007-), Punto(2007-) Citroen: Jumper(2006-), Relay(2006-) Peugeot: Boxer(2006-) Lancia: Ypsilon(2007-) Iveco: Daily(2007-), Eurocargo(2007-)
Software module 13

Peugeot, Fiat, Lancia, Citroen CPH Texton Memory device is serial eeprom, which can be either 93c66 or 95040, both SMD8 package. Expected file size is 512 bytes. Use T5 transponder. Software shows PIN code. Written transponder is ready programmed to start the vehicle.

Vehicles equipped with this unit:
Peugeot: 306, 806, Expert, Ranch Citroen: Jumpy, Evasion, Xantia(-1999), Xsara(-1999), Synergie (1997-2002) Fiat: Scudo, Ulysse Lancia: Phedra
Software module 12

Peugeot, Citroen immobox Valeo Memory device is serial memory 93c46 SMD8 package. Expected file size is 128 bytes. Software shows PIN code. Use T5 transponder. Written transponder is ready programmed to start the vehicle.

Vehicles equipped with this unit:
Citroen: Saxo, Berlingo(-2000) Peugeot: 106, 406(-1999), Partner(-2000) Dongfeng: H30
Software module 11

Peugeot,Fiat,Citroen immobox Siemens Memory device is Motorola MCU MC68HC05E6 SO28 package. Expected file size is 160 bytes. Use T5 transponder. Software shows PIN code. Written transponder is ready programmed to start the vehicle.

Vehicles equipped with this unit:
Peugeot: 306, Expert, Ranch Citroen: Jumpy, Evasion Fiat: Scudo, Ulysse
Software module 8

Fiat, Citroen, Peugeot CODE2 immobox Delphi

Memory device is serial eeprom 93c56 SMD8 package.
Expected file size is 256 bytes.
Use Megamos Crypto or Silca T6 – JMA TP08 or TS48 or CN6 or KD48 transponder.
Software shows 5-digit PIN code.
Written transponder is ready programmed to start the vehicle.

Vehicles equipped with this unit:
Fiat: Ducato(2001-2006), Seicento(1999-) Citroen: Jumper(2001-2006), Relay(2001-2006) Peugeot: Boxer(2001-2006)